In-tank high performance 12 volt pump, 190 ltr/hr at 0 psi, 155 ltr/hr at 40 psi.
You can find this pump at Auto Performance Engineering
The part number of the pump is GSS250
The part number of the pump and the installation kit is FPM004
Installation:
The New pump and installation kit.
First you have to remove the rear seat. Unscrew the cover and disconnect the wire.
Disconnect the other connector, the ground and removed the hose clamp and fuel lines.
Removed the six screws and take out the assembly.
This is the Walbro and stock pump.
